Algae Meets Fungi: Microalgae-Fungi Co-Pelletization for Biofuel Production
Microalgae-fungi biofuel has significantly less CO2 emissions than fossil fuels, making it much more environmentally friendly. As well, unlike traditional biofuel, microalgae-fungi does not require large masses of agricultural land for production. Thus, microalgae-fungi is an optimal option for biofuel production. This is a cost-effective renewable energy source that can be used in place of regular gas in cars and other means of transportation. By determining the most effective fungi for biofuel production, the threat of the impending environmental damage from pollution can be diminished. This novel experiment determines which fungi: Aspergillus niger, Rhizopus stolonifer or Saccharomyces cerevisiae, is the most effective bioflocculant in the microalgae-fungi co-pelletization process for biofuel production. We hypothesize that when paired with the microalgae Chlorella vulgaris, Rhizopus stolonifer will be the most effective. It has a high lipid content which could enhance the overall production of biofuel. Furthermore, its negative charge will aid with attracting and neutralizing the C. vulgaris colloidal particles resulting in an easier and more efficient removal of microalgae particles. Through the process of bioflocculation, pelletization, esterification and transesterification, the most effective fungi paired with C. vulgaris was determined. This experiment was carried out thoroughly and precisely resulting in a cost-effective solution for the world's current pollution crisis.
The change in NaCl crystals from cubic to octahedral～Sodium polyacrylate stabilizes the {111} face of Miller indices～
When adding 2% or 4% sodium polyacrylate as habit modifier, standard milky-white octahedral NaCl crystals grew gradually in saturated NaCl solution on the bottom of the container. [1] [2] Sodium polyacrylate is well known as a highly water-absorbable polymer with many carboxylate anions. In the case of low concentration (0.01%, 0.02%, 0.05%, 0.1% and 0.5%) sodium polyacrylate many small or microscopic crystals whose shapes were nearly octahedrons and had {111} faces were observed with an optical microscope on the bottoms of the solution containers. In low concentration sodium polyacrylate, octahedral NaCl crystals made up of electrostatically unstable {111} faces grew similarly to crystals in high concentrations of 2% or 4% NaCl. Therefore, by adding sodium polyacrylate to saturated NaCl solution, cleaved rock salt crystals in this sol were observed to find out whether or not a change in crystal morphology from cuboids of {100} faces to octahedrons of {111} faces would occur. Regardless of the sodium polyacrylate concentrations of 0.01%, 0.02%, 0.05%, 0.1%, 0.5% and 2%, all cuboid crystals changed into a pyramidal shape in which four of the side surfaces formed an equilateral triangle. When one side of each equilateral triangle face was rotated so the square face of the crystal was soaked in the NaCl sol, all crystals grew into octahedrons of high transparency. Sodium polyacrylate, even under a low concentration, caused morphological change in the NaCl crystals. Many carboxylate anions in the sodium polyacrylate attracted sodium ions and the repulsive force between the carboxylate anions became weak, excluding the water in the internal space of the polymer. We considered that the stabilizing {111} faces of gathered sodium ions attached to carboxylate anions. Chloride and sodium ions coordinated continuously to minimize the NaCl surface area, growing into an octahedral and lowering the surface energy of the NaCl crystal. [3]
Absorption of Sr2+ at low concentrations using C.moniliferum-- With the aim of practical use of contaminated water processing of the Fukushima Daiichi Nuclear Power Station
We are conducting research for the purpose of treating contaminated water generated by the nuclear accident with C.moliniferum. In previous research, the school seniors examined whether there is a difference in absorption by changing the wavelength of the LED to establish efficient Sr2+ absorption conditions. As a result, the red wavelength was found to be effective for the efficient Sr2+ absorption of C. moniliferum. Therefore, in this study, in order to verify how much Sr is actually absorbed into the cell, the amount of Sr absorption using an atomic absorption photometer is quantified, and the previous research has shown that red is effective for the efficient Sr2+ absorption. The wavelength was considered to be effective because of photosynthesis, and was observed with a scanning electron microscope (SEM) using the photosynthesis inhibitor (DCMU). As a result, it was clarified that C. moniliferum absorbs Sr intracellularly, and photosynthesis was related to absorption.