摘要或動機

It’s very important to control and monitor gases that are produced by industrial applications in different values and kinds because they can cause environmental pollution and health problems. Photonic Crystal Fiber (PCF), which is a different kind of optical fiber, is a new alternative for gas sensors due to their small sample volumes, low transmission losses and high flexibility properties. PCF’s are silica-glass fibers, made by periodic sequence of hollows along the fiber. By filling these hollows with optical liquids or gases very sensitive sensors can be made. In this project, we aimed to design a sensitive sensor by filling the hollows with proper gases and liquids in the solid core PCF. For these applications ethanol, methanol, toluene vapors and carbon dioxide was used. And to observe carbon dioxide’s effects ionic liquid (EMIMBF4), which carbon dioxide can dissolve in, was filled then the experiments were repeated. It was observed that the transmission of light in PCF changed depending on the refractive index of the gas that was filled. With this change, it was understood that there were another gas besides the usual containments of air. Our system could measure the absorbtion peak of toluen so it can be used as a toluen dedector and when ionic liquid filled the fiber, two steps that occur in the spectra of corbon dioxide so it can also be used as a carbon dioxide dedector. The system was customized as a carbon doxide sensor in a cost-efficient and portable way. Our system can be specialized and easiliy used with right light source, which is efficient to see the absorbtion peaks, and proper liquids to dedect intended gas. Making a carbon dioxide sensor by filling PCF with ionic liquid was never attempted before. Also the lack of carbon dioxide sensor studies supports the originality of our project. That’s why we think our project will contribute very importancies to the existing literature.