Exploiting the beneficial role of Biochar and Titanium (Ti) as a Sustainable and Green Strategy for Improving Agricultural Output in Saudi Arabia: Wheat as an Using Wheat as a Model
The present research work aimed to assess the impact of biochar (BC) amendment (5%) and foliar supplementation of titanium (Ti) at a concentration of 50 mg L-1 TiO2 on the growth, chlorophyll content, and biochemical parameters of wheat (Triticum aestivum L). The results demonstrated significant improvements in several aspects of wheat physiology due to these treatments, both individually and in combination. Plant height, as well as fresh and dry weight of wheat, exhibited substantial increases when subjected to Ti and BC treatments, with the highest enhancements observed in plants treated with both Ti and BC. Furthermore, chlorophyll content, including chlorophyll a, chlorophyll b, total chlorophylls, and carotenoids, showed marked increases in response to individual Ti and BC treatments, with even greater improvements when both treatments were combined. In terms of biochemical parameters, the content of proline, sugars, and free amino acids significantly increased in plants grown in soils amended with BC. Additionally, foliar Ti treatment led to elevated levels of these biochemical constituents. The combined treatment of Ti and BC resulted in the most pronounced effects. Moreover, oxidative damage parameters, such as hydrogen peroxide, lipid peroxide, and electrolyte leakage, were notably reduced in plants subjected to Ti and BC treatments, either individually or together. The activity of antioxidant enzymes, including superoxide dismutase, catalase, and ascorbate peroxidase, exhibited significant increases in response to Ti and BC treatments, further emphasizing their beneficial effects on wheat plants. Overall, this investigation shows that biochar amendment and titanium foliar supplementation both have beneficial effects on wheat development and biochemical parameters; these findings may be relevant to efforts to increase crop productivity and stress tolerance.
Fabrication of Tandem Dye-Sensitized Solar Cells to Enhance Photovoltaic Performance
Energy has had an enormous impact on the development of technology and is a main factor in humans’ advancement towards an evolved society. Nevertheless, nonrenewable energy resources – which are the most effective in everyday application - have led to changes in the climate, environment, human health, and the world in general [1], which has encouraged researchers to switch to the use of renewable energy sources. Solar Cells are one of the most effective resources that rely on renewable energy. They come in a variety of types, operation methods, and efficiency as shown in Figure 1, including Dye-Sensitized Solar Cells (DSSC), which, inspired by photosynthesis in plants, uses photo-sensitive dye to capture sunlight and generate electricity. DSSCs were proved to have generated a great deal of interest and are one of the most promising solar cells among third-generation PV technologies, due to their low cost, simple preparation, good performance, and environmental friendliness compared to conventional photovoltaic devices [3]. However, their efficiency is quite insufficient for everyday use. Previous studies proved that Tandem DSSCs – which are two dye-sensitized cells stacked on top of each other – are able to enhance cell performance. The light absorption range of a tandem cell is increased because the bottom cell behind the top one absorbs and uses the incident light that was not absorbed by it [4]. It operates as shown in Figure 2, where the light photons excite the electrons of the dye molecules. The electrons are then transported to the FTO (conductive glass) by the semiconductor, which is used in the figure as TiO2 nanoparticles. The electrons pass through the circuit to perform the work, then move to the counter electrode (shown as Platinum). They are then transported by the electrolyte (I-/I3-) back to the dye molecules, and the process is repeated.
Flavored Nanofiber Strips Loaded with Amoxicillin as an Alternative Method for Treating Bacterial Infections in Children
Semisynthetic penicillin, Amoxicillin, is a broad-spectrum antibiotic that is widely used to treat bacterial infections in children suffering ear, nose, and throat infections, genitourinary tract infections, skin infections, and lower respiratory tract infections1. This antibiotic works against both gram-positive and gram-negative bacteria, such as Listeria monocytogenes, Haemophilus influenza, Streptococcus pneumonia , Streptococcus pyogene and Escherichia coli1,2. It shows antibacterial activity by inhibiting dd-transpeptidase, which maintains the integrity of the bacterial cell wall which results in bacterial cell death due to a fragile cell wall3. Nonadherence to medication was associated with 50% of drug-related hospitalizations in children4. In order to improve adherence and influence clinical outcome, it is important to acknowledge the importance of drug palatability to children4–6. The currently available liquid suspension form of this antibiotic is administered to patients through oral/GI routes. It is also available in capsules or tablets for adults7–9. In the gastrointestinal tract, the drug has to withstand variable pH conditions and enzymatic degradation , mucus and mucosal barriers to survive resulting in limiting drug bioavailability10,11. In addition to conventional drug delivery formulations, nanofibers can be used to deliver drugs orally, topically, and through buccal or transdermal routes12. Drug-loaded nanofibers offer many advantages as a delivery system, including their porous structure and their efficient delivery of various drugs and bioactive molecules including hydrophobic and hydrophilic drugs12–14. Considering that amoxicillin palatability can affect children patients’ compliance and due to the advantages of both nanofiber drug delivery system and drug delivery through buccal routes, hence, this project aims to prepare flavored electrospun nanofibers loaded with amoxicillin to mask the unpleasant taste of the drug for treating children with bacterial infection. Nanofibers loaded with amoxicillin can be applied between the child's gum and cheek, allowing the fibers to dissolve in mucus and penetrate directly into the bloodstream.
Automated Alternative Compression/Traction of Lower Extremities AACT as a Musculoskeletal Countermeasure to Mitigate Bone Loss and Muscle Atrophy in Microgravity
Space Medicine and relevant sciences are still considered a new era; the first humankind steps toward the space took place since less than 60 years. It has been noticed the adverse effects of microgravity on the human body in different aspects, our concern here is the musculoskeletal aspect. On the ground we didn’t notice how we can stand up, or how our muscles and bones of the lower limbs can keep us standing up right. This is by a complicated process including the bones, the equilibrium, and the anti-gravitational muscles of the lower limbs which occurred without thinking about it. The force of Earth gravity against our bones of the lower limbs makes them harder and makes the muscles stronger, because they are interfacing the earth gravitational force every moment we are standing up, as per Newton’s third law (for every action in nature there is an equal and opposite reaction), such forces are unavailable in space and its effect being obvious on arrival to earth after long stay space flights, so being unable to keep standing upright easily on their arrival. On return to earth the routine medical examinations revealed loss of astronaut muscle mass and bone density particularly of their lower extremities because they did not use them in space for a long time. Currently, astronauts on board of ISS (International Space Station) they accomplish daily tasks including resistive exercises ARED “Advanced Resistive Exercise Device” in form of treadmill, ergometer, and weightlifting machine, to decrease the loss of bone density and muscle mass of their lower limbs. Despite their discipline to those exercises they still lose 1-2% of the muscle mass and bone density that give importance to add some protective measures to keep their muscles and bones healthy. Through this article, the idea is to make a device such AACT (Automated Alternative Compression/Traction) to be applied daily to the astronauts lower limbs as part of their daily exercise during space flight to give push/traction forces to astronauts lower limbs to prevent or at least decrease such loss, by AACT we are mimicking the gravitational force of earth on astounds lower limbs during long space flights to let them be healthy till they come back.
Bifunctional Nanostructured TiO2 photoelectrocatalyst for Improving Overall Water splitting performance
Titanium dioxide TiO2 is a semiconductor, that has great chemical and physical properties, such as remarkable resistance against corrosion, chemical stability, and it’s a non-toxic material. Due to these properties, it rises as an excellent candidate for a wide range of different applications, such as being a popular material for solar cells, paints, cosmetics, energy storge devices, and water splitting. For photoelectrochemical water splitting to generate Hydrogen, a large surface area is essential, to be maximized to enhance photocatalytic redox processes and hence improve overall efficiency. Therefore, different methods have been utilized to fabricate TiO2 nanotubular structure. However, they either encounter a difficult process because of a long synthesis time or the need of expensive precursors. In our work, we demonstrated a study of enhancing 1 D TiO2 film to perform as a bifunctional catalyst (works as cathode and anode). As it is known that TiO2 is kinetically hampered as cathode for producing hydrogen from water, this is due to sluggish electron transfer at the interface between TiO2 and water and the conduction band of the TiO2, which is more negative than H+/H2. To tackle this problem, TiO2 film should be modified. In this work, we modified the TiO2 as bifunctional by investigating different parameters in detail, like the anodic oxidation solution content, anodic oxidation time, and the role of the polyethylene glycol chain. Electrochemical characterization and SEM, and XPS were utilized to prevent the nanotubes structure and to confirm the chemical bonding as well as investigating the physical properties such as resistance and electron kinetic mobility.
Design of a new Hydrogen Fueled Hybrid Car Prototype
The proposed project involves a new water-fueled hybrid car prototype that integrates various technologies, including photovoltaic (PV) panels, electrolysis, a fuel cell, a metal hydride tank, and a battery. The car is equipped with PV panels on its surface, such as the roof or hood, which convert solar energy into electricity. This electricity powers a DC motor that propels the vehicle. Excess electricity can be stored in a battery or used in an electrolysis system to split water into hydrogen and oxygen. The hydrogen is stored in a metal hydride tank for later use. Metal hydrides are materials capable of absorbing and releasing hydrogen gas, providing a safe and compact storage solution. The fuel cell converts hydrogen into electricity to power the DC motor when sunlight is not available. This hybrid system allows for direct solar-powered operation while also storing excess energy as hydrogen. Experimental tests were conducted on a prototype of this water-fueled car, with the fuel cell serving as a backup power source to ensure continuous operation even without solar energy. This concept offers several advantages, including the use of renewable solar energy, zero emissions during fuel cell operation, and the ability to store and utilize excess energy.
Natural resources utilization for the in-house production of fluorescence lipid nanoparticles
Nanotechnology, a transformative force, has steadily gained traction across multiple scientific disciplines, including physics, chemistry, engineering, and biology. It offers unprecedented capabilities, especially in the realm of nanoscale particles, ushering in new paradigms in various applications. One of the most revolutionary applications of nanotechnology is in the pharmaceutical sector. Here, nanoparticles have transformed drug and vaccine delivery systems, offering both efficacy and precision. Among these nanoparticles, lipid nanoparticles (LNPs) have stood out, especially for their role in delivering nucleic acid-based drugs and vaccines. These LNPs are intricate assemblies composed of lipids and nucleic acid complexes, offering an amalgamation of stability and deliverability. Such properties have rendered LNPs as invaluable tools in enhancing therapeutic efficacy while minimizing off-target side effects. The myriad of nanoparticles available includes the likes of silver, gold, and lipid nanoparticles. However, the emphasis of this research lies with lipid nanoparticles, given their widespread success in the pharmaceutical arena. LNPs have showcased their potential in delivering drugs with low therapeutic indices, emphasizing their capability to act as versatile platforms for novel drug development. Recent advances have further expanded the horizons of LNPs, paving the way for novel antisense oligonucleotides, innovative vaccines, and complex lipid nanoparticle formations. Characterizing these nanoparticles is paramount, not only for the development of novel drugs but also to comprehend their in vivo behavior. Their multifaceted nature, stemming from their unique excipients, core-bilayer design, and varying sizes, makes their characterization a critical step in the research and development pipeline.
Silver nanoparticles-loaded titanium dioxide coating towards immobilized photocatalytic reactor for water decontamination and bacterial deactivation under natural sunlight irradiation
The environmental implications of rapid industrialization, including rising pollution, depleted resources, the effects of climate change brought on by global warming, and unrestrained groundwater extraction, are contributing to a growing water scarcity crisis [1-3]. The improvements in quality of life are largely attributable to the innovations in manufacturing technology made possible by the Industrial Revolution, but these innovations also pose risks to the natural world and human health [1-3]. The textile business uses a wide variety of raw materials, including natural fibers like cotton as well as synthetic and woolen fibers, and the chemical components of dyes are just one example. The annual output of synthetic dyes is around 700,000 tons, and there are over 10,000 different varieties available. As much as 200,000 tons of synthetic dyes are released into the environment every year due to the inefficient dyeing technique commonly employed in the textile industry. According to the World Bank, the processing of textiles for dyeing and finishing accounts for between 17 and 20 percent of industrial wastewater [1-3]. Textile wastewaters contain a high biological oxygen demand (BOD), chemical oxygen demand (COD), nitrogen, color, acidity, high suspended particles, high dissolved solids, surfactants, dyestuffs, heavy metals, and other soluble chemicals [3] due to the variety of dyes used to color textile items. In particular, water-soluble reactive and azo dyes are employed to obtain the required color. Ten to twenty percent of the dyes used end up in the effluents, where they might harm wildlife and the ecosystem (carcinogenic or mutagenic). Headaches, nausea, skin irritation, respiratory difficulties, and congenital deformities are only some of the health problems linked to exposure to textile wastewater. There are repercussions for aquatic ecology, environmental biodiversity, and the quality of receiving water bodies. New, low-cost, and highly effective water treatment methods are needed to deal with polluted wastewater. Adsorption and coagulation, two common water purification methods, just concentrate pollutants by shifting them to other phases; they do not "eliminate" or "destroy" them. Sedimentation, filtration, chemical oxidation, and biotechnology are all examples of conventional water treatment methods, but they all have their drawbacks. These include insufficient removal, high chemical reagent consumption, high treatment costs, long treatment times, and the creation of toxic secondary pollutants. New water treatment procedures are needed to improve the quality of treated effluent [1-3]. The use of semiconductor particles in photocatalysis is gaining appeal as a solution to global pollution problems due to its shown efficiency in degrading a wide variety of contaminants. Photocatalyst-coated surfaces-based reactors have proven to be practical for long-term operation over photocatalytic powder-based reactors (i.e., slurry-based reactors) [4-5]. As a promising photo-electrode and photocatalyst, titanium dioxide (TiO2) has enjoyed wider applicability in photocatalytic hydrogen generation, solar cells, and remediation of organic contaminants among other photo-catalytic applications [4-6]. TiO2 has been recognized as one of the low-cost, most effective, and fascinating photo-catalyst as a result of its interesting thermal and chemical stability, desirable electronic features, others, and environmental benignity [6-8]. Pristine TiO2 semiconductor is characterized by a wide band gap that can only utilize the UV part of the light spectrum with a wavelength of less than 385 nm, which is just 5% of the sunlight energy capacity. Spectrum usability extension to visible regions warrants further and extensive research study [8-10]. Additionally, the quickness of the recombination of photo-generated holes and electrons further restricts the practical applicability of the semiconductor [10-12]. It is highly desirable to develop a cost-effective scalable strategy to over these drawbacks toward sustainable development and a clean environment using only natural sunlight irradiation [5-11]. In addition, it is preferred to fabricate them as films rather than powders as photocatalytic immobilized reactors are more practical than powder-based reactors [4-8]. Dye sensitization, supports, magnetic separation, and surface modification by doping with non-metals, metals, and transition metals and coupling with other semiconductors have all been used to enhance the photocatalytic activity of TiO2 photocatalyst. Higher photonic efficiency can be attained through the synergistic fine-tuning of features such as physical, chemical, and electronic, and these composites and hybrid materials based on TiO2 are creating a big trend. Doping has been widely studied as a means of altering the surface of TiO2. Rare earth metals, noble metals, and transition metals are all discussed in the existing literature on the surface modification of TiO2 doped with cations [4-12]. In this study, for the first time, Ag nanoparticles loaded mesoporous TiO2 coating was prepared and applied as an immobilized photocatalytic reactor for water decontamination and bacterial deactivation under natural sunlight irradiation.
Development of Electrical Shielding system for auto dust removal for solar PV modules
Currently, Large-scale solar PV systems installations are taking place in the desert environment and space to harness abundant solar energy effectively. Dust accumulation on the surface of photovoltaic panels (PV) is the most stignant problem for photovoltaic panels, as dust deposition reduces PV problem energy generation efficiency significantly. Thus, the removal of dust from the PV panels has become very important to increase the rate of energy efficiency by the PV panels. The dust particles could be reduced using traditional dust cleaning techniques. But, in the harsh and hostile desert environment, these approaches which requires a lot of water, complicated mechanical instruments, enormous logistics, and personnel. Electrodynamic dust shielding (EDS) system has been developed at our laboratory to remove dust particles from the surface of the PV panels. The EDS system has been successfully tested for dust mitigation. The unique features of our EDS System is that it is cost effective, easy to install and no manpower required as it is an unmanned system. The design and construction of a single-phase electrodynamic dust repulsion device built locally in KSA is demonstrated in this study. This work showed that the optimized electrode design and electrical parameters, such as AC source voltage and frequency, maximized the EDS system's dust mitigation effectiveness. A perfect balance was achieved between the geometrical and electrical parameters of the EDS system, resulting in a dust removal efficiency of up to 92±1 ℅.