本研究目的1.探討催化劑對光子晶體SiO? 合成的影響，依據催化劑對光子晶體製作的數據，統整歸納出不同濃度的氨水催化劑對於SiO? 的吸收光譜與粒徑大小等性質的影響。2.尋找簡易的方式進行光通道的製作。 採用溶膠凝膠法將tetraethylorthosilicate(TEOS) 以氨水做催化劑在乙醇溶液中的水解及縮合反應製作單分散SiO?粉體。 嘗試將細線附著在玻片上進行排列，排列完成後將細線拉起企圖製造一條溝道。 實驗結果,催化劑會影響合成SiO? 的顆粒大小，隨著催化劑濃度增加，顆粒大小也隨之增加。使用細線可成功製造出凹陷的孔道，但目前採用之線仍嫌太粗，欲尋找奈米線材加以取代以製造出更適用之光通道。 ;The purpose of this research is 1.to find out the influence of the catalyst on compounding silica photonic crystals . According to datum , I can generalize the connection between the consistency of catalyst and the particle size of photonic crystal. 2.to find easier method of making the passage of light. I used tetraethylorthosilicate (TEOS) as a reactant and ammonia as the catalyst to react hydrolysis ,water condensation and alcohol condensation in ethanol. I tried to put fine lines on sheet glasses. After the arrangement of the silica particles, I took apart the lines attempting to make sunken ditches. The outcome of this ecperiment show that partical size increases with the consistency of catalyst. We can use fine lines to make the sunken ditches, but the line is not fine enough that I should find much finer lines to make it.