Steel slag, is received from iron and steel production facilities in Turkey, and is up to 25-30% from steel production. These couldn’t have been reclamation for any field of use and free stored in nature. When the structure of this slag examined, it was contained metallic formation (Fe2O3, Al2O3, MnO2, MgO2 etc.) and oxide compositions (SiO2, CaO2 etc.). The aim of this project is investigate metallic content of steel slag used as fertilizer in plants. For this purpose, slag is used to determine the physical and chemical characterization. Then, it is separated from metallic content by using shaking table and multi gravity separative (MGS) method. After these procedures, there are determinate 6 groups with different densities and different grit size. Element analysis was made of these groups by atomic absorption spectrophotometer (AAS) and ICP-OES system. In addition, mineral analysis was determined by XRD device. Thus, within each group minerals have been identified. Slag-soil mixture was prepared for determination the highest yield of using six different slag groups as fertilizer in the plant. Thus, corn crops were grown in different combinations. Then harvested corn plants and done soil analysis of the plants. As a result of experiments, percentage of the most effective slag-soil composition for corn was determined. The highest yield in the slag pot was determined the rate of %12.5 and coarse-grained. Ideally, the slag content found to be chinerals such as merwinite (3CaO-MgO-2SiO2), akermanite (2CaO-MgO-2SiO2), gehlenite (2CaO-Al2O3-SiO2). Thus, it was detected the steel slags can be used as feed material for plants. Hence by maintaining the ecological balance economic contribution to the country was achieved.
「為配合國家發展委員會「推動ODF-CNS15251為政府為文件標準格式實施計畫」,以及 提供使用者有文書軟體選擇的權利,本館檔案下載部分文件將公布ODF開放文件格式, 免費開源軟體可至LibreOffice 下載安裝使用,或依貴慣用的軟體開啟文件。」