Fabrication and Characterization of Dye-Sensitized Solar Cells Using Bixa orellana Seeds and Basella alba Leaves

科展類別
臺灣國際科展作品
屆次
2013年
科別
物理與太空科學
得獎情形
四等獎
學校名稱
Philippine Science High School Main Campus
作者
David Marco Marasigan MAGPANTAY

摘要或動機

Dye-sensitized solar cells (DSSCs) have cheaper and easier means of fabrication compared to the currently used solar cells, which are mostly silicon-based, so DSSCs are developed for a prospect of solar energy accounting for a higher percentage in the world’s total energy production, which is currently 0.1%. However, compared to their inorganic counterparts, their efficiencies are low, and the search for a dye that will maximize the potential of DSSCs is still ongoing. The aim of this study is to be able to evaluate the absorption range in the solar spectrum of dyes extracted from Basella alba leaves and Bixin orellana seeds, and of dyes resulting from the mixture of both extracts, using UV-Vis Spectrophotometer, with the objective of increasing the absorption; to be able to fabricate functional DSSCs from the individual and mixed dyes; and to be able to evaluate the different conversion efficiencies of the DSSCs of the individual and mixed dyes using Linear Sweep Voltammetry, with the aim of increasing the conversion efficiency due to a wider absorption range. B. alba leaves and B. orellana seeds were extracted using soxhlet extraction. The clean extracts were mixed in different proportions, and were characterized using UV-Vis Spectrophotometer. The two individual dyes together with two proportions of the mixed B. alba:B. orellana dyes, 1:1 and 2:1, were then incorporated into DSSCs. In the fabrication of DSSCs, twelve plates of Fluorine doped tin oxide were coated with titanium dioxide (TiO2) using spray pyrolysis. They were sintered and scraped, and were afterwards immersed in the four dyes for four days. Platinum plates were placed on top, and iodine-triiodide couple electrolyte was introduced via capillary action. The sealed DSSCs were subjected to Linear Sweep Voltammetry under dark and illuminated conditions, using a sun simulator. Results from the UV-Vis spectrophotometry showed that mixing the dyes had increased the absorption range of the individual dyes, although not superpositionally, and that the 2:1 mixed dye has the most potential. Being incorporated into DSSCs, the dyes, including the mixed ones, have successfully converted solar energy into electrical energy, as shown by the significance in conversion efficiencies under dark and illuminated conditions. However, despite the increase in the absorption range, neither of the mixed dyes have shown a higher conversion efficiency than the individual ones, which can be accounted for a possible weaker interaction between the two dyes and the TiO2, resulting to lower efficiencies. The study has been able to obtain and characterize dyes from B. orellana seeds and B. alba leaves and has been able to incorporate the dyes into DSSCs. With the wider absorption range of the mixed dyes, the study has been able to confirm the possibility of the dyes to maximize the potential of DSSCs, as shown by the successful conversion of solar energy into electrical energy of all fabricated DSSCs, including those of mixed dyes. If the possible problem with the dye-dye as well as the dye-TiO2 interactions could be solved, the possibility of much higher conversion efficiencies could be expected.


「為配合國家發展委員會「推動ODF-CNS15251為政府為文件標準格式實施計畫」,以及 提供使用者有文書軟體選擇的權利,本館檔案下載部分文件將公布ODF開放文件格式, 免費開源軟體可至LibreOffice 下載安裝使用,或依貴慣用的軟體開啟文件。」

檔案名稱 檔案大小 格式
Fabrication and Characterization of Dye-Sensitized Solar Cells Using Bixa orellana Seeds and Basella alba Leaves 580 KB Adobe Reader(Pdf)檔案